You have an Epson L200 printer. Now all the red lights are flashing, and You don’t know what else to try.
When using Epson L200 printer, you may encounter several flashing issues. The flashing alert advises reset the waste ink pad counter.
Normally, the printer’s red light blinks because of some causes, but the major cause of flashing is: One of the Epson L200 Waste ink pad counter can be overflow.
About Epson L200 Waste Ink Counter overflow
The Epson printer counts the amount of ink flow to waste ink pad and keeps this total number into printer’s memory space.
This number is called Waste Ink Counter and also Protection counter.
How to know Epson L200 printer Waste Ink Counters are overflow?
Full waste ink counter of Epson L200 is 100%. Overflow means Epson L200 waste ink counters values are more than 100%.
It is usually easy to look at Epson L200 waste ink counters with wic reset utility.
To know Epson L200 printer waste ink counter detail, run InkReset program then click on READ WASTE INK COUNTERS button:
When one and also two counters are overflow – you can not print – you have to RESET Epson L200 WASTE INK COUNTERS.
Tips on how to resolve Epson L200 waste ink counter overflow
Or how do I reset flashing lights error state on my Epson L200 inkjet printer?
During Epson L200 printer cleaning cycle, it dispels ink from its nozzles down a waste pipe into an absorbent pad.
Epson has place a counter within their printers (included Epson L200 printer) that counts every page passed through the printer and has place the Epson L200 printer to stop working after a particular number to prevent overflow of the waste ink pad.
Usually, Epson L200 printer’s waste pad is around 35% to 75% full when the printer starts showing one message. After the preliminary message, you can only print 19-20 pages before your Epson L200 printer refuses to print anymore.
There exists a workaround which you can use to reset to zero the counter to its first condition. Try these steps to resolve “Epson waste ink pad counter in the printer is overflow” error.
Reset Waste Ink Pad Counter for Epson L200 printer
Get the WIC Reset Utility here (WICReset). Use WinRar to extract the file.
Once extracted and before starting, make sure your Epson L200 printer’s driver are already installed on the computer.
Double-click exe to run the WICReset Utility. Epson L200 adjustment program screen will appear. Select your printer model (Epson L200) in the left sidebar.
Watch video how to fix Epson L200 printer waste ink counter overflow right here:
Or you can easily read the instruction on how to use wic reset tool to reset Epson L200 red light flashing problem here:
Regards and good luck
