If you have an Epson R390 printer. Now all the red lights are blinking, and You don’t know what else to try.
While using Epson R390 printer, you can encounter several flashing issues. The flashing alert advises reset the waste ink counter.
In fact, the printer’s red light blinking due to few causes, however the major cause of flashing is: Among the Epson R390 Waste ink pad counter can be overflow.
About Epson R390 Waste Ink Counter overflow
The printer depends just how much ink flow to waste ink pad and places this information into printer’s memory.
This amount known as Waste Ink Counter and also Protection counter.
How you can know Epson R390 printer Waste ink Counter is overflow?
Maximum waste ink counter of Epson R390 is 100%. Overflow means Epson R390 waste ink counters values are large than 100%.
This can be very simple to check Epson R390 waste ink counters with InkReset software.
To check Epson R390 printer waste ink counter information, start wic reset software then click on READ WASTE INK COUNTERS button:
When ever one and also more than one counters are overflow – you can’t print – you have to RESET Epson R390 WASTE INK COUNTERS.
How you can resolve Epson R390 waste ink counter overflow
Or how do you reset flashing lights mistake condition on my Epson R390 inkjet printer?
During Epson R390 printer washing cycle, it dispels ink from its nozzles down a waste pipe into an absorbent pad.
Epson has put a counter in their printers (included Epson R390 printer) that counts every page moved through the printer and has place the Epson R390 printer to stop print after a specific number to avoid overflow of the waste ink pad.
Usually, Epson R390 printer’s waste pad is around 35% to 75% full when the printer begins telling an error message. After the initial message, you can only just print 19-20 pages before your Epson R390 inkjet printer won’t works anymore.
There is a workaround which you can use to reset to zero the counter to its initial state. Try these actions to resolve “Epson waste ink pad counter in the printer is overflow” error.
Reset Waste Ink Pad Counter for Epson R390 printer
Get the WIC Reset Utility here (WICReset). Make use of Winrar or Winzip to extract the downloaded file.
Once extracted and before starting, make sure your Epson R390 printer’s driver already are installed using the pc.
Double-click exe to run the WICReset Utility. Epson R390 adjustment program screen will appear. Select your printer model (Epson R390) in the left sidebar.
Play video how exactly to solve Epson R390 printer waste ink counter overflow below:
Or you can easily browse the instruction on the best way to make use of wic utility to reset Epson R390 red light flashing error here:
Cheers and best of luck
